DATALOG-M24LR-A
DATALOG-M24LR-A is a data logger reference design based on the 64-Kbit Dual Interface EEPROM (M24LR64), a low power Microcontroller (STM8L101) and a digital temperature sensor (STTS75).
It measures temperature, and offers an RF access to the data of the application thanks to the ISO15693 interface of the M24LR64. The RF antenna is etched onto a PCB is the same as the 20 mm x 40 mm antenna of ANT2 M24LR-A reference design.
|
DATALOG-M24LR-A
DATALOG-M24LR-A is a data logger reference design based on the 64-Kbit Dual Interface EEPROM (M24LR64), a low power Microcontroller (STM8L101) and a digital temperature sensor (STTS75).
It measures temperature, and offers an RF access to the data of the application thanks to the ISO15693 interface of the M24LR64. The RF antenna is etched onto a PCB is the same as the 20 mm x 40 mm antenna of ANT2 M24LR-A reference design.
|
STEVAL-TDR001V1
The STEVAL-TDR001V1 is a two-stage RF power amplifier including output low pass filter (LPF) for harmonics rejection specifically designed for portable two way UHF radio communication.
|
ANT1-M24LR-A
ANT1-M24LR-A is a reference design for antennas to be etched onto a PCB, either on your main PCB or an off-board PCB module antenna. It is a 75 mm x 45 mm antenna, optimized for giving the best read range using the ISO15693 technology. It offers up to around 40 cm of read range using the Dual Interface EEPROM development kit (DEVKIT-M24LR-A). Please refer to AN2972 for antenna design tips and some of the basics of the RF technology.
|
ANT2-M24LR-A
ANT2-M24LR-A is a reference design for antennas to be etched onto a PCB, either on your main PCB or an off-board PCB module antenna. It is a 20 mm x 40 mm antenna, optimized for a good ?read range vs PCB real estate? ratio. It offers up to around 20 cm of read range using the Dual Interface EEPROM development kit (DEVKIT-M24LR-A). Please refer to AN2972 for antenna design tips and some of the basics of the RF technology.
|
