Inventory Search | Manufacturers | Products | Distributors | Product Information Pages
Home | Sign In | Register

Omron Electronic Components LLC

55 Commerce Dr. Ste B
Schaumburg, IL 60173-5302
USA
WebSite: http://www.components.omron.com
Phone: 847-882-2288
Toll Free: 800-55OMRON
Fax: 847-839-2488
Email: components@omron.com
   

Products for Omron Electronic Components LLC: Skip Navigation Links.

Authorized Distributors for Omron Electronic Components LLC:
ALLIED ELECTRONICS, INC. MOUSER ELECTRONICS
ARROW ELECTRONICS NEWARK ELEMENT14
AVNET EXPRESS AMERICAS ONLINECOMPONENTS.COM
DIGI-KEY CORPORATION POWER & SIGNAL GROUP
ELECTRO SONIC, INC. RELAY SPECIALTIES INC
HEILIND ELECTRONICS SAGER ELECTRONICS
HUGHES-PETERS INC. TTI, INC.
MASTER ELECTRONICS WALDOM ELEC(distributors only)

Recent Articles for Omron Electronic Components LLC:
RF MEMS Switching: What You Need to Know
In this application note, the basic operation principle and driving method for OMRON’s MEMS switch (2SMES-01), that has an . . .
Applying MEMS for quality of life
MEMS technology is enabling new biomedical applications that improve quality of life (QoL) in a variety of ways. Providing . . .
MEMS gas mass flow sensors use cyclonic effect to keep clean — Omron Electronic Components
In differential pressure-sensing applications for gasses, using a mass flow sensor often improves low-flow resolution, resulting in a much . . .
RF MEMS switch offers exceptional 10-GHz performance
The 2SMES-01 electromechanical switching relay features a MEMS-based construction that enables exceptional high-frequency performance at frequencies as high as . . .
Distribution boxes ease sensor-actuator wiring
A series of IP 67-rated multiport distribution boxes features Smartclick circular industrial connectors offering one-touch bayonet locking. The boxes . . .

Videos for Omron Electronic Components LLC:
Omron Electronic Components LLC - Corporate Introduction Video
For almost 80 years, Omron Electronic Components has been a leading manufacturer and provider of advanced electronic components. Extensive product groups include relays, switches, connectors, RF MEMS switch, MEMS flow sensors, pressure sensors, and optical components. Omron Electronic Components is the Americas subsidiary of Omron Corporation, a $7.5 billion global leading supplier of electronics and control system components and services. Their broad product offering can be found in applications for the communications, transportation, medical, HVAC, appliance, industrial automation, consumer electronics, and test & measurement markets around the world. This brief video offers a highlight of the company, their people, their principles, their core technologies, and their network .... Get to know Omron TODAY!!
MEMSThermalIR Demo 2012
Omron Electronic Components LLC Sensor Product Manager, Ms. Donna Sandfox, introduces the NEW D6T Thermal IR Sensor. She shares details of this new technology, demonstrates the product's functionality, and provides insight in to ideal applications. For more information, technical data sheets, or samples, please contact Omron directly: components@omron.com
Omron Demonstrates NEW Piezo Resistive Pressure Sensor technology at Sensors Expo 2012
Sensor Product Manager and Assistant Medical Market Manager, Ms. Donna Sandfox, demonstrates and speaks about the SOON TO BE RELEASED 2SMPP-02 sensor. Expanding on their Piezo Resistive Pressure Sensor technology, a MEMS Absolute Pressure Sensor is nearing completion. Able to detect changes in elevation at a resolution less than 1 vertical meter, it could be used, for instance, to determine what floor of an office building a person is on. With an operating pressure of 50 to 110 kPa, target applications for this product include enhancement of GPS Navigation, Portable Navigation Devices, Weather Forecasting Equipment, and Vertical Velocity Indication.
Omron Electronic Components Demonstrates NEW D6FPH MEMS Mass Flow Sensor at Sensors Expo 2012
Sensor Product Manager and Assistant Medical Market Manager, Ms. Donna Sandfox, demonstrates and speaks of the NEW D6F-PH MEMS Mass Flow Sensor from Omron Electronic Components at the 2012 Sensors Expo in Chicago. The sensor uses the Omron mass flow MEMS Chip, and will have the same external structure as their highly acclaimed D6F-P0010A1. However, the internal flow path has been redesigned to produce a low flow (70 mL/min), high impedance sensor with a differential pressure range of 0-250 Pa. When used in a bypass type design (or set-up similar to a differential pressure sensor), this product is not sensitive to variations in the bypass tube length. The product is targeted for, but not limited to, the HVAC market, as tubing in HVAC damper controls is often installed in the field, which makes it a challenge to maintain consistent tube lengths.
Omron Presents NEW LED Driver Controller IC
Omron's LED Controller IC is specifically designed to have changes in LED brightness line up with the sensitivity of the human eye. Here is a simulation showcasing the output from Omron's LED Controller IC to that of conventional methods.
Omron Electronic Components Demonstrates NEW Thermal IR Sensor at Sensors Expo 2012, Chicago
Product Manager, Ms. Donna Sandfox, demonstrates and speaks about the new Thermal IR Sensor technology from Omron Electronic Components from the show floor of Sensors Expo 2012. Omron's MEMS Non-contact Temperature Sensor can detect even stationary human presence with high sensitivity.
Omron Electronic Components: Offering Premium Solutions to the Medical Marketplace
Omron Electronic Components is a premier supplier of a variety of electronic component and subassembly solutions designed for use in Medical Devices. We supply the world with innovative electronic and mechanical components that create smooth interfaces between people and machines, supporting ubiquitous computing. Whether you are designing Medical Devices for Respiratory, Radiology/Imaging, the Hospital Floor, Surgical Suite, or Laboratory, Omron has component solutions for your specific application needs. We are committed to providing quality-driven products and reliable support to satisfy the design needs of the Medical Industry worldwide, and this video will demonstrate our message
Omron MEMS Flow Sensor Product Training Module
This product training module offers a succinct, but tremendously informative presentation of Omron's MEMS flow sensor line-up, as well as their superior MEMS technology. - video developed and released by Omron Electronic Components LLC, Americas "The main feature of the MEMS Flow Sensor is its ability to measure flow speed from 1 mm to 40 m/s, which covers the range from the fluttering of a butterfly's wings to the roar of a typhoon. At the heart of the MEMS Flow Sensor, there is a tiny sensor element. That is the MEMS Flow Sensor chip which is only 1.5 mm square. Conventional flow sensors use a resistance measurement method based on a natural characteristic that causes the electrical resistance of a material to change due to changes in temperature. This method has a number of disadvantages, though, such as the high cost required for the extremely time-consuming adjustment of the resistance balance. (See Figure 1.) In contrast, the MEMS Flow Sensor was the industry's first to apply the thermopile method, which uses an element called a thermopile that converts thermal energy into electrical energy. This new method offered a variety of previously nonexistent advantages, including low-cost operation because there are few adjustments required, low power consumption, and high sensitivity." - comments by: Sasaki, Omron MEMS Flow Sensor chip Developer
Omron Presents Energy Efficient DC Power Relays and Switches for the Automotive Industry
This presentation introduces Omron's DC power relays, automotive relays and switches. DC power relays are a new range of products developed for applications such as clean-energy vehicles and storage batteries for homes. The products were developed in response to the rapidly growing trend in many different fields to use renewable energy and to reduce CO2 emissions. This presentation also provides insight on typical applications and usage of switches and relays in transportation applications. Details of innovative solutions and customization of products to meet specific application requirements are also covered. Omron's goal is convenience, comfort and safety. This presentation demonstrates a solid portfolio of superior electronic component solutions for transportation applications, and is brought to you in partnership with the Power & Signal Group. The presentation includes an overview and demonstration of Omron's relays and switches that meet the reliability requirements of the transportation market and that are also designed to be environmentally friendly Contact Omron TODAY for additional information and requests on all of your Automotive relay and switch needs. Visit us online at components.omron.com or send us an email at components@omron.com
About Electroforming
A brief video that explains Omron's proprietary technology that makes creation of minute lead frames and terminals a possibility.
OMRON MEMS Sensors: D6F-PH Differential Pressure and D6T Thermal IR Sensors
Omron presents two of its newest additions to their MEMS sensor portfolio in this video. Building on over 22 years of MEMS development and experience, they eagerly share the NEW D6F-PH Differential Pressure and D6T Thermal IR sensors with the market. Both products are built with remarkable quality and highly sought after features and benefits. These products are very well suited for a broad array of industries and applications, that include, but are not limited to: Medical, Building Automation, Energy, HVAC, Security, and Transportation. Please enjoy the video and contact Omron with any questions, technical inquiries, requests for pricing and samples, etc. You can find us online at components.omron.com, email us at components@omron.com, or call us at 847-882-2288.
Omron's DC Power Relays: Featuring the G9EN-1
Omron's G9EN-1 DC Power Relays switch non-polarized resistive loads up to 60A, 400 VDC; it achieves a weight reduction of 55% and a cubic volume reduction of 51%, compared to previously released DC Power Relays. Compatible with screw terminal and tab terminal layouts, it is perfect for use in electric, hybrid or fuel cell vehicles. In factory or consumer applications, it can be used in electric forklifts, industrial robotics, energy storage systems or PV Inverters.
Omron's State-of-the-Art D6T MEMS Thermal IR Sensor
High Sensitivity Enables Detection of Stationary Human Presence OMRON's unique MEMS and ASIC technology achieves a high SNR. Superior noise immunity with a digital output. High-precision area temperature detection with low cross-talk field of view characteristics. Omron has developed this new, super-sensitive sensor for non-contact thermal measurement that makes full use of proprietary Omron MEMS sensing technology. The D6T sensor, operating on infrared radiation sensing principle, is very suitable for human detection. It can detect the presence of people in an area without the need for movement and thus it is an outstanding alternative to pyroelectric sensors or PIR detectors in home automation, building automation, healthcare, security and industrial applications. Most human presence sensors rely on movement, but the D6T is able to detect occupation by sensing body heat and provides a more reliable basis for switching off lighting, air conditioning and other services when the space is empty. Conventional sensors often fail to distinguish between an unoccupied space and a stationary person. As D6T sensors are also able to monitor the temperature of a room, they can also be used to control the level of heating and air conditioning systems and maintain optimal room temperature levels without wasting energy. Unusual changes in temperature can also be used in other ways, for example to detect line stoppages, identify hot spots before a fire breaks out or in clinical applications to check whether a patient has left the bed. While standard thermal sensors are only able to measure temperature at one contact point, the D6T can measure the temperature of an entire area without any contact. Signals generated by infrared rays are extremely weak; so to achieve reliable detection, Omron has developed and manufactured every part of the new, high-sensitivity thermal sensor in-house, from the MEMS sensors to ASICs (application-specific integrated circuits) and other application-specific parts. The technology behind Omron's D6T thermal sensors combines a MEMS micro-mirror structure, for efficient IR radiation detection, with a high-performance silicon lens to focus the infrared rays onto its thermopiles. Proprietary application-specific integrated circuits then make the necessary computations and convert sensor signals into digital I2C outputs. The result is excellent ±1.5 C° accuracy with high noise immunity. Omron aims to contribute and develop state-of-the-art solutions for other new technologies that may implement this new sensor, which enhance people's safety, security and comfort.
Fiber optic transceiver sub assembly
Omron's Martin Smith describes the SX-51
The SX-51 CWDM fiber optic transceiver sub-assembly has four 1.65 or 3.5 Gbit/s data channels can transmit and receive full HDMI (or other data) at up to 300 meters using multimode cable.
Reference Design Documents for Omron Electronic Components LLC:
P1xX4C-SX4-01 Reference Design
The typical SX4 application requires two OSAs, one transmitter and one receiver, connected to separate I/O boards. The P1TX4C-SX4-01 (TOSA) will accept inputs compatible with PECL, CML, and LVDS, while the P1RX4C-SX4-01 (ROSA) outputs are compatible with CML.